FM2-LE Fan/Filter Modules0 pages

Better Air is Our Business

®

FM2-LE
Self-Contained Energy
Efficient Fan/Filter Modules
for Cleanroom Applications

The FM2-LE is a self-contained fan/HEPA filter module for cleanroom
applications. It can be used to upgrade existing cleanrooms or to
convert existing space into a cleanroom without additional ductwork
or air handling equipment. The modules can be used in most
conventional ceiling grids or may be suspended independently.
FM2-LE modules are available in 2' x 2', 2' x 3', and 2' x 4' sizes.

Options
Energy Efficient
FM2-LE modules are energy efficient. Each module utilizes a
rugged AC motorized impeller rated at 2.4 amps at start up and
approximately 2 amps while in operation. The aluminum backward
curved impeller is lightweight and has a long service life. All motors
are dynamically balanced and 100% quality inspected.

Standard Features
• Extruded aluminum filter cell sides
• AstroCel ® II HEPA filter, 99.99% efficient on 0.3 micrometer
particles, 2"-deep minipleat media pack. HEPA meets UL 586
and UL 900

• Duct connection (10" or 12" diameter) in lieu of prefilter
• Power cord
• Center divider with test port in filter
• ULPA filter, 99.9995% efficient on 0.1 - 0.2 micrometer particles,
scanned
• 3" or 4" deep HEPA or ULPA filter
• Knife-edge filters for gel grid systems
• 230-volt, 60-Hz motor
• Stainless steel faceguard

• White expanded metal faceguard on the downstream side of
the filter
• 16-gauge mill finish aluminum pressure housing with 4 support
points for hanging
• 115V, 60Hz, single-phase, energy efficient, backward curved
motorized impeller wired junction box
• Variable speed control
• All electrical components UL Classified
• PerfectPleat ® M8 1"-deep prefilter with DuraFlex ® media, MERV 8

Latches seal and hold the AstroCel ® filter securely to the module.