Multiple setup0 pages

Multiple setup

Easy setup of multiple parts
The Tebis module for multiple setup facilitates
the separation of NC programming and setup
planning. NC programming can now be performed
at a different time and organized separately from
Multiple Setup
mechanical manufacturing. Do you use grid plates,
tombstones, or multi-changers, or do you simply
use your large machine table with several parts? With Tebis, all
situations are under control, and changes to the geometry – even
just prior to manufacturing – are no problem. And you don't need
to be an expert in programming to define multiple setups.
NC programming
Completely separate from the simultaneous machining later, your
specialists use proven methods to program electrodes, trim and
coining steels, production parts or any other parts. This is now all
possible thanks to Tebis NC automation.
Setup planning
The individual components are combined in one setup only
when the actual machining is scheduled. Thanks to the graphic
representation, you are able to quickly determine the correct
position, or to position to the part reference point determined at
the machine. Load tombstones and grid plates or utilize the entire
table of your portal milling machine. Clamping situation and
clamping elements are under control.

Tools and reference points
Sort the toolpaths according to your needs – for fast machining by
tool, or by part when a high degree of accuracy is required in the
machining area – and link the individually programmed toolpaths
into one NC program. Tebis provides you automatically with an
overview of the tools required for loading. If you need to work
extremely accurately, or if you have extended traversing paths at
your machine or long machining times, you may use multiple
reference points.
Flexibility and safety
Part changes just before starting the manufacturing process?
A single click of a button updates the changed part program
and you stay on target with your time line. Must edit the cutter
compensation when machining trim and coining steels? Reload
the part – your NC programmers can continue to do their job,
without interruption.
Use the Tebis Simulator to also fully check all machine movements
for collisions and to exclude even final imponderabilities.
Advantage
Utilize the know-how and the expertise of your machine operators
for your setup planning. The essential benefit of Tebis is the
temporally separate and independent NC programming. Your
components are processed consequently.