Quattromill Alu0 pages
APPLICATION CASES
nnnnCONTACT & INFORMATION
nnnnTOOLS
nnnnMILLING
nnnnGEARBOX HOUSING
nnnnMaterial | Al-alloywith8% Si | |
Surface | Pre-machined | |
Operation | Face milling | |
Cutter | R220.53-0080AL-09-6C | |
Insert | SEEX09T3AFFN-L1, PCD05 | |
vc | 1500 m/min | |
fz | 0.1 mm/tooth (4775 mm/min) | |
ap | 1.0 mm | |
Result | 10 000 parts machined |
SECO MACHINING NAVIGATOR:
nnnnUpdate catalogue 2010
nnnnONLINE INFORMATION:
nnnnComplete Quattromill-AL information:
nnnnhttp://www. secotools. com/quattromill_al
nnnnSeco Tools international website:
nnnnhttp://www. secotools. com
nnnnCYLINDER BLOCK
nnnnMaterial | Al alloy/ grey cast iron | |
Surface | Pre-machined | |
Operation | Face milling | |
Cutter | R220.53-8250AL-09-20C | |
Insert | SEEW09T3AFFN-L1, PCD30M | |
Vc | 400 m/min | |
fz | 0.12 mm/tooth (1221 mm/min) | |
ap | 0.5 mm | |
Coolant | Dry | |
Result | 150 minutes machining time |
<
nnnnw
nnnno
nnnno
nnnnQUATTROMILL-AL
nnnnTM
nnnnLIGHTWEIGHT FACE MILLING CUTTER
nnnnFOR ALUMINIUM ALLOYS
nnnnSeco Tools AB, 737 82 Fagersta, Sweden. Tel +46 223 400 00.
nnnnwww.secotools.com
"