درباره سازنده
MATAIR The Company was founded in 1975 by Messrs. Jean Berthier and Michael DEBOST, Engineers Arts & Crafts, promotional Cluny 1950.
It was at the request of their customers Boilermakers, that were not on the market adapted to specific requests ovens (drying of electrodes and welding flux) Messrs. BERTHIER and DEBOST created the MATAIR Company.
In particular, the Creusot-Loire and Framatome Companies were very sensitized with the problem of cracks appearing in time on the surface of welds or stainless steel coatings. These cracks are due primarily to the combination of hydrogen with the molten metal, hydrogen from the steam contained in the coating of the electrodes and in the welding flux.
MATAIR has solved these problems by developing robust ovens, well insulated, ensuring a homogeneous drying by judicious arrangement of electrical resistors and control by precise and suitable measuring instruments. In particular, the ovens called "programmable" provide a full cycle of steaming without human intervention. The dynamic drying of the problem of flow has been fully resolved by steaming modules that allow to dry flow continuously with a 100 l / hour throughput.
The modules can be combined with 2, 3 or 6 devices and to ensure higher flow rates. Finally, to avoid moisture absorption problems with the flow during its handling after steaming, MATAIR created the CERF (Steaming Center and Auto Recycling Flow) which allows the welder from his welding station to dry the flow to separate the clinker and fine, to ensure mixing new flow, flow recovered in the desired proportions in a fully automatic cycle, and this, without altering the particle size of the flows (air blast system). The CERF has received approval from ANVAR. MATAIR finally developed a full range of baking equipment from the quiver and the portable oven ovens up to 2000 liters with vacuum cleaners to mobile or fixed flow, vibrating screen,
The experience MATAIR allows him to study and solve all the problems of drying welding products or smoke aspirations with solutions adapted to each case. For fifteen years, the MATAIR Company has diversified into the design and manufacture special ovens adapted to customer needs.
It has undertaken ovens: polymerization, processing of composite materials, orthopedics, drying of plastic granules, thermoforming, conformage of rubber parts, teaching.
اطلاعات تماس
- 721 Route de Servignat
01560 Saint Trivier De Courtes
FRANCE - info@matair.com
- +33 (0)4 74 30 79 14
- +33 (0)4 74 30 77 17
- http://www.matair.com/